This project has moved. For the latest updates, please go here.
BarbaClient configuration file.

[General]
ServerName=Your Server Friendly Name
ServerAddress=0.0.0.0
Key=1234567890ABCDEF

[Item1]
Name=VPN-PPTP Retunnel
Enabled=1
Mode=UDP-Tunnel
TunnelPorts=9700,9800-9900,17000-17200
GrabProtocols=GRE:*,TCP:1723

[Item2]
Name=VPN-SSTP Redirect
Enabled=1
Mode=TCP-Redirect
TunnelPorts=8700,8800-8900,18000-18200
RealPort=443

[.]
.
.
.

ServerName

Optional, Default is ServerAddress.
You can name this configuration file, usually the your server friendly name such as "VpnServer". BarbaMonitor display this name when use this configuration.

ServerAddress

Required
The IP4 address of your server in this format: 0.0.0.0

Key

Optional, Default is empty key and will stop the encryption.
Your simple shared encryption key in Hex . BarbaTunnel XOR all packet data with this key. VPN already perform encryption so strong encryption does not required.
  • Make sure server use same key.

Name

Optional, Default is Item Mode.
Your optional friendly name for the item. BarbaMonitor display this name when use this item configuration.

Enabled

Optional, Default is "1".
It can be "0" or "1". If "0" the item will be disabled.

Mode

Required
Can be "UDP-Tunnel" | "UDP-Redirect" | "TCP-Redirect".

TunnelPorts

Required
Range of tunnel ports. BarbaClient will choose one of this port by random.
Format: TunnelPorts=StartPornt-EndPort,StartPornt-EndPort,,StartPornt-EndPort,...
If you like to use only one port just set one port such as: TunnelPorts=80
  • Make sure BarbaServer accept this port.
  • Make sure your network firewall does not block this port.
  • System Local Firewall such as Windows Firewall does not effect on BarbaTunnel, you don't need any change to them.

RealPort

Required, When mode is UDP-Redirect or TCP-Redirect.
BarbaClient will redirect this port to a tunnel port.

GrabProtocols

Required, When mode is UDP-Tunnel or TCP-Tunnel.
BarbaClient grab sending packet from this protocols and put them to tunnel.
Format: Protocol:Port
Sample1 for PPTP: GRE:*,TCP:1723
Sample2: UDP:150,TCP:500,ICMP:*,IGMP*,GGP*,PUP:*,IDP:*,ND:*

Remarks

  • Make sure items be sequenced such as Item1, Item2, Item3, ....

Last edited Jan 1, 2012 at 1:41 PM by BarbaCoder, version 6

Comments

No comments yet.